Imer Small 50 Evo

Small 50 EVO is usually positioned under the discharge outlet of a mixer to pour the mixture directly into the hopper. Wet products that do not need to be mixed, can be poured directly into the hopper. The mixture contained in the hopper is sucked by the rotor-stator pumping system and pushed into the hose until it reaches the opposite end. Accessories and devices for spraying and injecting material at controlled pressure can be connected. A hose can also be used on the machine for pouring the self-levelling or filling products. Set the pumping speed using the exclusive IMER A1 inverter, adapting the machine to different needs. Small 50 EVO is equipped with a diagnostic display, which signals any anomalies during use and related resolution methods. The exclusive IMER A1 inverter allows the Small 50 EVO to operate with appropriately sized generators.

• Wet products that do not need to be mixed, can be poured directly into the hopper.
• The mixture contained in the hopper is sucked by the rotor-stator pumping system and pushed into the hose until it reaches the opposite end.
• Accessories and devices for spraying and injecting material at controlled pressure can be connected.
• A hose can also be used on the machine for pouring the self-levelling or filling products.